Back door board up

Me and Faysal boarded up the back door, it gives the space a sense of dereliction, character and looks fairly sinister. It also conveys the sense of reclusion that our character felt.

Boot Machine Mount

For the boot machine we decided to use rotary cams to lift and drop the beaters similar in the way that Michael Kontopolous has done so in the video below


Machines that Almost Fall Over from Michael Kontopoulos on Vimeo.


We have built the rotary cams at uni using the fine art departments facilities, we then used dave to weld a mount onto the motor in which a rod can be screwed. We took this to hackney and attached it all to a larger mount we previously built, and to our amazement....it works! Another success, a little too successful if you ask me....watch this space.

Binoculars x Persicope

Our initial intention to just use a set of binoculars is not going to work if we want to viewer to see the animation through the praxinoscope machine. The praxinoscope is too low, so we have decided to combine it with a periscope turned upside down.

This works in theory, but we have not actually mounted anything yet.

Animation

I took it upon myself to use the animation departments facilities that I had access to last year for the animation module. After trying to decide whether we would go for a model animation or a drawn animation we went for drawn. This was because we were unsure as to how the model animation would work when viewed through binoculars from a distance, a flat image would be easier to make out.

Me and Faysal designed a few different boats in our sketchbooks and decided on the final boat. I then took it to the animation department and drew 12 frames in the correct size for the praxinoscope. These were tested out when we got back to Hackney and worked well, they will later be mounted on stronger card and painted.

Praxinoscope Build

Ok, so turns out a praxinoscope is no easy task! We underestimated how fiddly it would be to cut mirror, get all the measurements right and glue the whole thing together along with the bike wheel!

First of all, we found the circumference of the circle, which Faysal's maths qualification came in very useful for. Then we divided this by 12 (the praxinoscope's we saw in the childhood museum had 12 mirrors so we thought we would do the same) after doing this we attempted to find the middle of the circle, however this proved fairly inaccurate because the garden sieve we used to attach to the wheel was not perfectly circle. After this, we constructed a dodecahedron (12 sided shape) to glue the mirror panels to in the centre of the praxinoscope. So far, so good...now the hard part: cutting the mirror.

We found the mirror outside James and Faysals flat, it was very thin so we thought this would make it easier to cut. Turns out it was pretty old and therefore brittle, so it was a real challenge getting 12 panels out of it with a glass cutter. With mirror shattered all over the place we eventually managed to get a set of 12 mirrors and 2 spare ones. They have a few cracks in them but we feel this will add to the DIY aesthetic.

So once it was all superglued and screwed together we attached the motor and powered it up...it works! Now all we need to do is put the animation inside it, mount it and it is sorted.

Blueprint printing

Whilst I was at work, James and Faysal printed the blueprints onto acetate and prepared the paper we had chosen from Atlantis for printing on. Leaving them to dry ready for us all to print the blueprints.

I was really excited about this process and I feel it has worked very well.

First of all we took all of our designs and paper over to textiles where they have a UV press, which means that the process was a lot quicker than using sunlight. We printed them individually, exposing the paper through the acetate for 3 minutes and 10 seconds per print. Then putting them in a light safe box and taking them over to the specialist darkroom for washing. After an initial test, we went ahead with printing all three in this way and they looked great.

We were always nervous that this process may not work how we intended it too, that the text might be blurry or any other problems may occur. But it looks spot on, genuine blueprints have been created from my crude drawings, which to me is brilliant and a new technique learnt for the future.

the initial test

UV press

washing the prints....almost there!

finished!

Blueprint designs

I have been working on these for quite some time. My concentration has been mainly on Fig 1. (boot machine) and Fig 2. (praxinoscope) while Faysal has been working on the transmission machine. The idea is to print the final designs on acetate and use cyanotype printing techniques to finalise them.

The designs have gone through many changes, which are documented in mine and Faysal's sketchbooks, and the finished designs can be seen below:

It was my concern to hand draw the blueprints on A3 paper, whilst Faysal scanned them in and worked on them using photoshop. I joined him after finishing all the drawing and James stepped in at the end adding a few final touches.

I am happy with how they have worked out and feel they meet our expectations and intended aesthetic of a cross between amateur and official.

Ripping Research

We always knew this would be a big task and I feel it will be ongoing over the next few weeks. Over the duration of the project we have been buying relevant books for the research which will be plastered onto the walls. Me and Faysal have been looking through all the books finding relevant information which we can rip out to later do this with.

Super 8 shoot 2

Me and Faysal set out on a days shooting people in groups of three. We had the idea to just pick people we see in groups of three whilst we wander around the local area. It was supposed to feel slightly awkward, with the subjects looking directly in the camera, like in a still photograph, but moving. This was to allow the method of scratching out the middle person to become simpler and also was for subtlety, to avoid overwhelming the spectator in our installation with loads of moving imagery.

To our suprise, not many groups of three were to be found! We got a few people, some kids, professional types on lunch break, that sort of thing. But the most successful was probably of three butchers. We may chop these up or leave just one of them as the loop. We decided however, that we should postpone handing in the footage for a week as it gives us time to gather more shots in this way.

I later discovered an old english folk story about three butchers  who decide to fight of some rapists in order to rescue a woman. It involves the two butchers wanting to run away, whilst the third insists on fighting but is rewarded by the woman stabbing him to death. Perhaps this is the ill fated one? However, a nice reference to the kind of 'old wives tales' and superstitious beliefs that this shoot is dealing with.

Black and White 35mm

We set out to develop the Black and White 35mm immediately, however...when we got into the dark rooms we felt a bit out of our depths having not used the equipment for quite some time.

It was decided that we wouldn't do it until later, when we could read up on it a bit or receive help from friends more acquainted with the dark rooms.

While I was at work, the day after the shoot, we thought that we should just go for it. James and Faysal went into uni and did a great job in the dark room and printing. After I finished work they showed me the prints and I am very happy with the way that they have turned out. I am kind of dissapointed that I didn't get to do it with them as I would have liked to have got involved in the dark rooms. It is, however, important we get this stuff done so it is out of the way in time for building and because I work two days a week it is unavoidable that I will miss out on some things.